Thermodynamic process - Wikipedia, the free encyclopedia. Classical thermodynamics considers three main kinds of thermodynamic process: change in a system, cycles in a system, and flow processes. Defined by change in a system, a thermodynamic process is a passage of a thermodynamic system from an initial to a final state of thermodynamic equilibrium. The initial and final states are the defining elements of the process. The actual course of the process is not the primary concern, and often is ignored.
This is the customary default meaning of the term 'thermodynamic process'. In general, during the actual course of a thermodynamic process, the system passes through physical states which are not describable as thermodynamic states, because they are far from internal thermodynamic equilibrium. Such processes are useful for thermodynamic theory. Defined by a cycle of transfers into and out of a system, a cyclic process is described by the quantities transferred in the several stages of the cycle, which recur unchangingly. The descriptions of the staged states of the system are not the primary concern. Cyclic processes were important conceptual devices in the early days of thermodynamical investigation, while the concept of the thermodynamic state variable was being developed.
PHYSICAL CHEMISTRY IN BRIEF Prof. One of the fundamental thermodynamic equations is the description of thermodynamic work in analogy to mechanical work, or weight lifted through an elevation against gravity, as defined in 1824 by French physicist. Statistical Ph ysics I I (PHYS*4240) Lecture notes (F all 2000) 0 0.2 0.4 0.6 0.8 1 0 0.5 1 1.5 2 2.5 3 The International Association for the Properties of Water and Steam Lucerne, Switzerland August 2007 Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam (The revision. P R E P R I N T – ICPWS XV Berlin, September 8–11, 2008 Fast Calculation of Thermodynamic Properties of Water and Steam in Process Modelling using Spline Interpolation Matthias Kunicka, Hans-Joachim Kretzschmara, and Uwe. A Reference Equation of State for the Thermodynamic Properties of Ethane for Temperatures from the Melting Line to 675 K and Pressures up to 900 MPa D.
Defined by flows through a system, a flow process is a steady state of flows into and out of a vessel with definite wall properties. The internal state of the vessel contents is not the primary concern. The quantities of primary concern describe the states of the inflow and the outflow materials, and, on the side, the transfers of heat, work, and kinetic and potential energies for the vessel. Flow processes are of interest in engineering. Kinds of process. The initial and final states are the defining elements of the process. The actual course of the process is not the primary concern, and often is ignored.
Selected Values of Chemical Thermodynamic Properties The theoretical framework of thermodynamics was well established by the time NBS was founded, and certain important applications, such as improving the efficiency of steam. 1 Chemstations, Inc – Houston, TX – 800.243.6223 – http:// Practical Thermodynamics Used in Simulations Fred C. Thermodynamic Properties (TP) Thermodynamic Properties
Gmddmica d Cmmchrmica AC/U Vol. 2295-2309 Copyright Q 1992 Pergamon Press Ltd. 1X16-7037/92/$5.00 +.oO Phase relations in the system NaCl-KCl-H,O: V. Thermod~ami~-FIX analysis of.
A state of thermodynamic equilibrium endures unchangingly unless it is interrupted by a thermodynamic operation that initiates a thermodynamic process. The equilibrium states are each respectively fully specified by a suitable set of thermodynamic state variables, that depend only on the current state of the system, not the path taken by the processes that produce that state. In general, during the actual course of a thermodynamic process, the system passes through physical states which are not describable as thermodynamic states, because they are far from internal thermodynamic equilibrium.
Such a process may therefore be admitted for equilibrium thermodynamics, but not be admitted for non- equilibrium thermodynamics, which primarily aims to describe the continuous passage along the path, at definite rates of progress. Though not so in general, it is, however, possible, that a process may take place slowly or smoothly enough to allow its description to be usefully approximated by a continuous path of equilibrium thermodynamic states. Then it may be approximately described by a process function that does depend on the path. Such a process may be idealized as a . Such idealized processes are useful in the theory of thermodynamics. Cyclic process. The descriptions of the staged states of the system may be of little or even no interest. A cycle is a sequence of a small number of thermodynamic processes that indefinitely often repeatedly returns the system to its original state.
For this, the staged states themselves are not necessarily described, because it is the transfers that are of interest. It is reasoned that if the cycle can be repeated indefinitely often, then it can be assumed that the states are recurrently unchanged. The condition of the system during the several staged processes may be of even less interest than is the precise nature of the recurrent states. If, however, the several staged processes are idealized and quasi- static, then the cycle is described by a path through a continuous progression of equilibrium states. Flow process. The internal state of the vessel contents is not the primary concern. The quantities of primary concern describe the states of the inflow and the outflow materials, and, on the side, the transfers of heat, work, and kinetic and potential energies for the vessel. The states of the inflow and outflow materials consist of their internal states, and of their kinetic and potential energies as whole bodies.
Very often, the quantities that describe the internal states of the input and output materials are estimated on the assumption that they are bodies in their own states of internal thermodynamic equilibrium. Because rapid reactions are permitted, the thermodynamic treatment may be approximate, not exact. A cycle of quasi- static processes. In the example, a cycle consisting of four quasi- static processes is shown. Each process has a well- defined start and end point in the pressure- volume state space. In this particular example, processes 1 and 3 are isothermal, whereas processes 2 and 4 are isochoric. The PV diagram is a particularly useful visualization of a quasi- static process, because the area under the curve of a process is the amount of work done by the system during that process.
Thus work is considered to be a process variable, as its exact value depends on the particular path taken between the start and end points of the process. Similarly, heat may be transferred during a process, and it too is a process variable. Conjugate variable processes. An example would be to have a movable piston in a cylinder, so that the pressure inside the cylinder is always at atmospheric pressure, although it is separated from the atmosphere. In other words, the system is dynamically connected, by a movable boundary, to a constant- pressure reservoir.
An isochoric process is one in which the volume is held constant, with the result that the mechanical PV work done by the system will be zero. On the other hand, work can be done isochorically on the system, for example by a shaft that drives a rotary paddle located inside the system. It follows that, for the simple system of one deformation variable, any heat energy transferred to the system externally will be absorbed as internal energy. An isochoric process is also known as an isometric process or an isovolumetric process.
An example would be to place a closed tin can of material into a fire. To a first approximation, the can will not expand, and the only change will be that the contents gain internal energy, evidenced by increase in temperature and pressure. The system is dynamically insulated, by a rigid boundary, from the environment. Temperature - entropy.
An example would be a closed system immersed in and thermally connected with a large constant- temperature bath. Energy gained by the system, through work done on it, is lost to the bath, so that its temperature remains constant. An adiabatic process is a process in which there is no matter or heat transfer, because a thermally insulating wall separates the system from its surroundings. For the process to be natural, either (a) work must be done on the system at a finite rate, so that the internal energy of the system increases; the entropy of the system increases even though it is thermally insulated; or (b) the system must do work on the surroundings, which then suffer increase of entropy, as well as gaining energy from the system.
An isentropic process is customarily defined as an idealized quasi- static reversible adiabatic process, of transfer of energy as work. Otherwise, for a constant- entropy process, if work is done irreversibly, heat transfer is necessary, so that the process is not adiabatic, and an accurate artificial control mechanism is necessary; such is therefore not an ordinary natural thermodynamic process. Chemical potential - particle number. Otherwise, we may assume boundaries that are rigid, but are permeable to one or more types of particle. Similar considerations then hold for the chemical potential. These are the processes outlined just above.
There is no energy added or subtracted from the system by particle transfer. The system is particle- transfer- insulated from its environment by a boundary that is impermeable to particles, but permissive of transfers of energy as work or heat. These processes are the ones by which thermodynamic work and heat are defined, and for them, the system is said to be closed. Thermodynamic potentials. For example: Polytropic processes. This equation can be used to accurately characterize processes of certain systems, notably the compression or expansion of a gas, but in some cases, liquids and solids.
According to Planck, one may think of three main classes of thermodynamic process: natural, fictively reversible, and impossible or unnatural. For thermodynamics, a natural process is a transfer between systems that increases the sum of their entropies, and is irreversible. They are convenient theoretical objects that trace paths across graphical surfaces. Because the points on the paths are points of thermodynamic equilibrium, it is customary to think of the . They would decrease the sum of the entropies if they occurred.
It does not occur in physical reality. It may be imagined as happening infinitely slowly so that the system passes through a continuum of states that are infinitesimally close to equilibrium.
An Advanced Treatment for Chemists and Physicists, fifth revised edition, North- Holland, Amsterdam, p. Generalized Thermodynamics, M. I. T. Press, Cambridge MA, p.
Planck, M.(1. 89. Treatise on Thermodynamics, translated by A. Ogg, Longmans, Green & Co., London, p. Mosca, Freeman, 2. ISBN 0- 7. 16. 7- 8. Encyclopaedia of Physics (2nd Edition), R. G. Trigg, VHC publishers, 1.
ISBN 3- 5. 27- 2. Verlagsgesellschaft), ISBN 0- 8. VHC Inc.)Mc. Graw Hill Encyclopaedia of Physics (2nd Edition), C. B. Parker, 1. 99. ISBN 0- 0. 7- 0. 51. Physics with Modern Applications, L.
H. Greenberg, Holt- Saunders International W. B. Saunders and Co, 1. ISBN 0- 7. 21. 6- 4. Essential Principles of Physics, P. M. Hodgeson, 2nd Edition, 1.